ANX7911

ANX7911

Application

DESCRIPTION

     The ANX7911 outputs 14 voltage references for Gamma correction in TFT-LCD displays and one voltage reference for Vcom. Each reference

voltage whether for Gamma or Vcom has its own 10-bit digital-to-analog converter (DAC) and

amplifier to ensure a stable voltage when critical levels and patterns are displayed.

     The ANX7911 also has integrated multiple-time programmable (MTP) memory to store Gamma and Vcom values on the chip, eliminating the need for external EEPROM. ANX7911 supports up to 1000 write operations to the on-chip non-volatile memory.

     The Gamma outputs can settle within 1us. The Vcom output can provide 100mA peak transient current and also settles within 1us. The analog supply voltage range extends from 6.5V to 18V, and the digital supply voltage range extends from 2.7V to 3.6V.

     Gamma values and the Vcom value are programmed into registers through the I2C interface.

     The ANX7911 is available in a thin 32-pin 5x5 mm WQFN green package.

FEATURES

6.5V to 18V input supply

14-channel rail to rail programmable Gamma Buffers

- 10 bits resolution for each channel

- 25mA output current for each channel

- 2 banks register using BANK_SEL to select   which bank data output

1-channel rail to rail operational amplifier

          - 7 bits adjustable output

        - ±100mA Output Current

        - ±140mA Output Short-Circuit Current

        - 20V/μs Slew Rate

2-wire I2C slave mode interface

One control pin to allow storing data into NVM (Non-Volatile Memory)

Thermal shutdown

Thin 5x5 mm 32-lead WQFN package 

PIN CONFIGURATION

图片1.png

Title Last update Share Viewing times

ORDERING INFORMATION

Part NumberPackage

ANX7911AAQ

WQFN-32L, 5x5

TYPICAL APPLICATION DIAGRAM

图片1.png

Do Not Sell My Personal Information │Privacy policy Cookie policy Terms of use Terms of sale